Function: Suitable for OPP packaging and OPP stationery tape slitting.

Gauge:

Mechanical width: 1.0M/1.3M/1.6M

Maximum feeding diameter: 800㎜

Maximum mechanical speed: 180M/min

Minimum strip width: 12㎜

Maximum winding diameter: four axes exchange 150㎜

Coil core diameter: 26-77 ㎜(1 "core can only be suitable for 1.3M or less)

Equipment features:

1. Feeding and winding are combined, occupying a small space and convenient operation.

2. The material is rolled out with a surface press wheel device, which can make the rolled out material smoother.

3. Slitter tool adopts industrial flat knife, suitable for film tape slitter.

4. Power using a motor with two-stage length counter, stable and accurate shutdown.

5. The winding tension is controlled by the magnetic powder clutch (the old model is a butterfly spring), with individual sliding winding, the material thickness is not good, it can be automatically adjusted, and the tension of all finished products is average.

6. The production is equipped with a paper tube loader, which can unload the finished product and load the paper tube at the same time to achieve consistent operation.

7. Waste winding adopts surface line winding to reduce refuelling times and save time.

Optional equipment introduction:

1. Paper tube loading and unloading aluminum mold: It must be purchased when producing different widths, and the size can be specified according to demand

2. Hydraulic feeding machine: fast feeding and manpower saving.

3. Automatic labeling device: This device will automatically paste the end paper in operation to achieve the maximum production capacity of the machine.

4. Roll out muffler: the noise can be reduced to achieve an ideal environment when the material is rolled out.

5. Air knife slitting device: This function can improve the use of paper or cloth tape.

6. Bin mixing device: the addition of this function can save the trouble of manual paper tube.

7. Winding independent mechanism: Select this structure can make the original four axes linkage become only the two axes of winding operation operate separately, saving loading and unloading time.